ABSTRACT The region around the municipality of Bastos, state of São Paulo, accounted for about 7% of Brazilian egg production in 2015. In 2012, it experienced a heat wave that resulted in the death of approximately 500,000 hens, according to information released at the time. Considering the impact of heat waves on layer mortality, the objective of this study was to analyze how heat waves impact the layer farming in the region of Bastos, considering the climate change scenarios forecasted by the IPCC for the next years. This study was conducted in three stages: i) analysis of the IPCC reports to understand climate change scenarios; ii) analysis of historical temperature data in the region of Bastos; iii) analysis of how climate change, through heat waves, may impact layer mortality in this region. All the IPCC scenarios indicate that both average temperature and the number of extreme events, such as heat waves, are expected to increase. Historical data showed that since the mid-1980s, maximum temperature has increased, as well as the frequency, intensity and duration of heat waves. The association of layer mortality due to heat waves with the IPCC climate change forecasts for that region indicates a trend of increasing layer mortality in egg production operations which sheds are not equipped with air conditioning.

ABSTRACT The objectives of this study were to monitor the thermal environment of different hatchery locations during the transfer of fertile eggs from the setter and to the hatcher, to measure egg heat loss, and to determine its effects on hatchery results. In total, 1,728 fertile eggs of Cobb broiler breeders were divided into two treatments. In treatment 1 (T1), after 19 days of incubation, eggs were removed from the incubator and transferred to the hatcher in aninsulated box, and in treatment 0 (T0), eggs were transferred with no thermal insulation (T0). The duration of egg transfer was 10 minutes. Eggs were photographed using a thermographic camera at the exit of the setter, arrival at and exit from the candling room, and arrival at the hatcher. Based on the thermographic images, egg heat loss between these locations was calculated. At hatch, total hatchability, hatchability of fertile eggs, and hatchling weight were recorded and compared between T0 and T1. The temperature and relative humidity of the corridor between the setter and the candling room, of the candling room, of the corridor between candling roomand the hatcher were monitored using data loggers. The results indicated that T1 eggs lost 0.15 kJ less heat than T0 eggs during transfer. However, hatchability and hatchling weight were not affected by transfer treatment during the studies period.

ABSTRACT Egg production is an important economic activity in Brazil, with about 697 million eggs produced annually. The conventional cage system is commonly used for egg production. However, there has been a growing concern for the welfare of laying hens around the world. In this context, many countries have issued laws, protocols, and other normative technical specifications to ensure the welfare of layers. This study aims at identifying similarities and differences between international standards and Brazilian protocols using the Comparative Law perspective. This article reports an analytical study of selected protocols, performing three analyses using the Comparative Law method. The research concludes that some items of the Brazilian protocols of good egg production practices, such as farm inspection, treatment of diseases, temperature, ventilation, beak trimming, feed and water supply, correspond to international specifications, whereas others, such as housing, freedom movement, use of equipment, and transport, are less strict.

ABSTRACT Light is an important factor in the management of laying poultry. The ideal lamp spectrum that provides the best welfare conditions still needs to be determined. Wavelength and light intensity influence poultry behavior and their welfare. This study evaluated the influence of four lamps types with different light spectra on the behavior of seventy 52-week laying hens. Incandescent, fluorescent, and sodium and mercury vapor lamps were set in a different poultry house each and supplied similar light intensities. Layer behavior was video-recorded three times weekly using video cameras installed on the ceiling. The effects of different wavelengths emitted by the light sources on layer behavior were evaluated by the Kruskal-Wallis median test. Results indicated that incandescent and sodium vapor lamps increased the occurrence of nesting, and of active behaviors, such as floor-scratching and pecking.

This article describes the genetic evolution of commercial broilers between 1990 and 2009, considering live performance, in particular, in terms of weight gain and feed conversion ratio. In order to determine if the assumption that the relationship between body weight gain and feed conversion ratio is increasing and positive, information on all broiler strains reared in Brazil were collected from several companies present in five Brazilian regions. This survey aimed at evaluating broiler live performance as a function of genetic improvement with time. Broiler performance improved, as shown by the statistical differences obtained for the following parameters: livability, live weight, daily weight gain, feed conversion ratio, and production efficiency index between 1990 and 2009. However, live weight gain and feed conversion ratio are emphasized due to the significant differences found along the studied period.

Brazil is the world leader in broiler production and export. It achieved this position mainly to its excellent supply chain structure and climate, which favor poultry and grain production throughout its territory. Although Brazilian egg production is not as important as broiler production, this segment presents great potential of increasing its share in the global market. However, as elsewhere in the world, Brazilian poultry production faces the challenge to balance two elements within its supply chain: cruelty and productivity. The consumers of the European Union (EU) are very concerned with animal welfare issues. In order to increase its share in the European market, and eventually in the world market, Brazilian poultry producers must understand the effects of production systems on poultry welfare, and try to develop systems that are suited for its climate and other production conditions. There is a consensus that the natural behaviors performed by poultry in intensive production systems allow better welfare. This objective of this review is to present scientific research studies that relate different behaviors to chicken welfare. Poultry behavior is a reflex of their welfare status at a particular moment, and it is related to internal (physiological) and external (environmental) factors. Several natural behaviors that favor welfare, as well as undesirable behaviors, may be stimulated by environmental enrichment. The correct interpretation of the behaviors expressed by poultry, including their frequency, duration, and sequence, may be used to estimate their welfare. Animal production is an import sector of Brazilian economy. It significantly contributes to the Gross Domestic Product (GDP), in terms of products destined both to domestic consumption and exports. New technologies applied to products and management practices have been developed for field application, aiming at improving producers' productivity and profitability. In order to comply with the European Union's (EU) guidelines for animal protein production, Brazilian poultry production needs to undergo a process of adaptation. In May, 2007, the EU Commission established its new guidelines for animal welfare in poultry production, pressured by consumer demand. In the EU, there is a growing concern among consumers as to how poultry are reared and slaughtered. European consumers are in the fore front of the demand of high quality products produced with under better welfare conditions, and have spread this concern throughout the world. Beaumont et al. (2010) mentioned that European consumers frequently perceive that standard commercial poultry production has poor animal welfare practices. According to Nääs et al. (2008), Brazilian poultry production today needs to find a balance between cruelty and productivity. In fact, ensuring animal welfare may provide better financial results, as it increases the producer's profit margins and allows maintaining Brazilian chicken export quotas to the EU. França (2008) noted that biological studies that define ethical limits and guidelines for poultry production foster the development of new production practices that may ensure good product quality and productivity without putting bird welfare at risk. Gonyou (1994) states that, when animal welfare started to be studied, the only behavioral factors considered were those related to feeding and reproduction. These first studies used as indicators of animal welfare reduced life expectancy, impaired growth, impaired reproduction, body damage, disease, immunosuppression, adrenal activity, behavior anomalies, and self-narcotization (Broom, 1991). However, current studies evaluate additional indicators, such as natural behaviors, behavioral needs, preferences, behavioral problems, emotional state, cognitive abilities, etc. In the field of ethology, the expression of natural behavior is a frequently used tool used to estimate the welfare of poultry destined to human consumption. According to Bracke & Hopster (2006), natural behavior can be defined as the behavior the animal normally presents when exposed to conditions similar to its natural habitat. Natural behaviors are pleasurable and promote biological functions that are meaningful to the animal's welfare. The definition of natural behavior, though, does not include the bird's behavior when sick, in flight or during aggression, since these are not considered pleasurable situations. Considering layer behavioral needs in the design of housing facilities optimize their welfare. Mishra et al. (2005) verified that ISA Brown layers spent, during 24 hours, around 97% of the time in the nest, feeding, walking, resting, or dust bathing, and that 57% of these behaviors did not depend on environmental enrichment. It was also observed that hens had preferred behavioral sequences, which included foraging and comfort behaviors, such as wing-stretching and preening. The present review aims at discussing, albeit not exhaustively, scientific research studies on the behavior of Gallusgallus domesticus and its relationship to welfare. The following behaviors are reviewed: feather pecking, scratching, dust bathing, nesting, locomotion activities, and aggressive behaviors. These behaviors are the most frequently observed in commercial broiler, broiler breeder, and layer farming, and therefore, monitoring their incidence may contribute to measure poultry welfare.

Broiler chicken production is widely dispersed across the globe, and one important issue for growers is the selection of adequate bedding material, as the availability and price of substrates varies among countries and regions within a same country. This study aimed at applying a multiple criteria analysis approach for the selection of the most appropriate bedding material for broiler production. Based on field research data and growers' experience, the most desirable characteristics of a litter material were chosen as the main criteria. The selected materials were wood shavings, rice husks, chopped Napier grass (Pennisetum pupureum), 50% sugar cane bagasse (Saccharum L.) plus 50% wood shavings, 50% sugar cane bagasse (Saccharum L.) plus 50% rice husks, and pure sugar cane bagasse (Saccharum L.). The analytical hierarchy process (AHP) was applied for selecting the most suitable bedding material. Validation was performed using data from previous studies carried out in central-western Brazil on the effects of different types of bedding material on broiler carcass quality. Considering the selected criteria, several bedding materials were tested and ranked, and the results showed that wood-shavings litter was the best option (weight = 0.28), followed by rice husks (weight = 0.24). All other tested alternatives presented lower scores and were, therefore, not considered for use. The AHP approach was found to be an efficient tool to select the most appropriate litter material under specific scenarios.

This study was conducted to determine the effect of the air temperature variation on the mean surface temperature (MST) of 7- to 35-day-old broiler chickens using infrared thermometry to estimate MST, and to study surface temperature variation of the wings, head, legs, back and comb as affected by air temperature and broiler age. One hundred Cobb® broilers were used in the experiment. Starting on day 7, 10 birds were weekly selected at random, housed in an environmental chamber and reared under three distinct temperatures (18, 25 and 32 ºC) to record their thermal profile using an infrared thermal camera. The recorded images were processed to estimate MST by selecting the whole area of the bird within the picture and comparing it with the values obtained using selected equations in literature, and to record the surface temperatures of the body parts. The MST estimated by infrared images were not statistically different (p > 0.05) from the values obtained by the equations. MST values significantly increased (p < 0.05) when the air temperature increased, but were not affected by bird age. However, age influenced the difference between MST and air temperature, which was highest on day 14. The technique of infrared thermal image analysis was useful to estimate the mean surface temperature of broiler chickens.

Climate may affect broiler production, especially where there are heat waves, which may cause high mortality rates due to the heat stress. Heat wave prediction and characterization may allow early mitigation actions to be taken. Data Mining is one of the tools used for such a characterization, particularly when a large number of variables is involved. The objective of this study was to classify heat waves that promote broiler chicken mortality in poultry houses equipped with minimal environmental control. A single day of heat, a heat-shock day, is capable of producing high broiler mortality. In poultry houses equipped with fans and evaporative cooling, the characterization of heat waves affecting broiler mortality between 29 days of age and market age presented 89.34% Model Accuracy and 0.73 Class Precision for high mortality. There was no influence on high mortality (HM) of birds between 29 and 31 days of age. Maximum temperature humidity index (THI) above 30.6 ºC was the main characteristic of days when there was a heat wave, causing high mortality in broilers older than 31 days. The high mortality of broilers between 31 and 40 days of age occurred when maximum THI was above 30.6 ºC and maximum temperature of the day was above 34.4 ºC. There were two main causes of high mortality of broilers older than 40 days: 1) maximum THI above 30.6 ºC and minimum THI equal or lower than 15.5 ºC; 2) maximum THI above 30.6 ºC, minimum THI lower than 15.5 ºC, and the time of maximum temperature later than 15:00h. The heat wave influence on broiler mortality lasted an average of 2.7 days.

Layer mortality due to heat stress is an important economic loss for the producer. The aim of this study was to determine the mortality pattern of layers reared in the region of Bastos, SP, Brazil, according to external environment and bird age. Data mining technique were used based on monthly mortality records of hens in production, 135 poultry houses, from January 2004 to August 2008. The external environment was characterized according maximum and minimum temperatures, obtained monthly at the meteorological station CATI in the city of Tupã, SP, Brazil. Mortality was classified as normal (£ 1.2%) or high (> 1.2%), considering the mortality limits mentioned in literature. Data mining technique produced a decision tree with nine levels and 23 leaves, with 62.6% of overall accuracy. The hit rate for the High class was 64.1% and 59.9% for Normal class. The decision tree allowed finding a pattern in the mortality data, generating a model for estimating mortality based on the thermal environment and bird age.

Two experiments were carried out at the Poultry Sector of the School of Agrarian Sciences of the Federal University of Grande Dourados to evaluate the incidence of leg problems in broilers reared on two distinct types of bedding material: rice husks or wood shavings, both new and reused. In both trials, a randomized experimental design was applied in factorial arrangement (2 x 2 x 2) using two genetic strains (Cobb® or Ross®); two sexes (male or female), and two litter materials (rice husks or wood shavings). In each trial 1080 one day pullets were reared equally divided in the treatments. The birds were placed in 4.5 m² boxes at a density of 10 birds m-2. All birds were fed diets with equal nutritional density, and water was offered ad libitum. Feeds were divided in three phases: starter diet (1 - 21 days), grower diet (22 - 35 days), and finisher diet (36 - 45 days). On day 45, fifty birds were randomly selected in each experiment to evaluate flock leg problems. The following parameters were analyzed: gait score, incidence of valgus and varus disorder, footpad dermatitis, femoral degeneration, tibial dyschondroplasia, and spondylolisthesis. Ambient temperature during rearing and litter caking and moisture content were recorded in four boxes per treatment. The analytical hierarchy process was used to organize the data into specific criteria. Several criteria, related to the attributes that were determinant according to the statistical analysis, were chosen in order to provide the best input to the process. Results indicated that new wood-shavings bedding was the most appropriate bedding to prevent locomotion problems, followed by new rice husks, reused wood shavings, and reused rice husks. However, when leg problems were associated to sex and genetic strain, male Ross birds strain presented less problems when reared on new rice husks, followed by new wood shavings

Considering the importance of drinking water and its effect on broiler performance, drinking water quality was studied using six different litter materials. The presence of coliform bacteria and Escherichia coli was investigated. The following litter materials were used in the trial: wood shavings, rice husks, chopped Napier grass (Pennisetum pupureum), 50% sugarcane bagasse (Saccharum L.) + 50% wood shavings, 50% sugarcane bagasse (Saccharum L.) + 50% rice husks, and plain sugarcane bagasse (Saccharum L.). A number of 1620 Ross® one-day-old chicks were reared in 54 pens measuring 4.5 m² each, equipped with a bell drinker and a tube feeder. Water samples were collected in sterile tubes on days 28 and 42 of the rearing period, and submitted to the laboratory for analyses. Microbiological data were organized by classes expressed in a logarithm scale, where the lowest contamination corresponds to class 1 and the highest contamination to class 4. Results showed that total coliform contamination was higher on day 28 than in the end of the rearing period, and that E. coli presence was detected during both analyzed periods. The litter materials that presented lower degree of water contamination, predominantly class 1, were sugarcane bagasse and 50% of sugarcane bagasse and 50% of rice husks.

Heat stress limits the productivity of laying hens, as reflected by egg production and egg quality. The present study aimed at showing the correlations between egg quality parameters and environmental variables recorded on the day eggs were laid and on the previous days. Birds were housed in battery cages in a commercial poultry house. Main component analyses were used to verify associations between environmental and production variables, and Pearson's linear correlation tests were used to further investigate those associations. Analyses were carried out separately for to layer strains, Dekalb® White and Hy-Line® w36, and the variables egg weight (g), eggshell weight (g), specific gravity (g/cm³) and eggshell percentage (%) were compared with the environmental variables of the same day of the production, and one, two, three, and four days before egg production. Sound intensity measured inside the houses was positively associated with the quality parameters of eggs produced on the next day. Thermal environmental variables affected the egg quality differently in each strain, particularly air temperature, internal roof tile temperature, relative humidity, and air velocity. Ammonia concentration measured inside the houses was lower than 1ppm, and did not affect production performance.

Animal welfare issues have received much attention not only to supply farmed animal requirements, but also to ethical and cultural public concerns. Daily collected information, as well as the systematic follow-up of production stages, produces important statistical data for production assessment and control, as well as for improvement possibilities. In this scenario, this research study analyzed behavioral, production, and environmental data using Main Component Multivariable Analysis, which correlated observed behaviors, recorded using video cameras and electronic identification, with performance parameters of female broiler breeders. The aim was to start building a system to support decision-making in broiler breeder housing, based on bird behavioral parameters. Birds were housed in an environmental chamber, with three pens with different controlled environments. Bird sensitivity to environmental conditions were indicated by their behaviors, stressing the importance of behavioral observations for modern poultry management. A strong association between performance parameters and the behavior "at the nest", suggesting that this behavior may be used to predict productivity. The behaviors of "ruffling feathers", "opening wings", "preening", and "at the drinker" were negatively correlated with environmental temperature, suggesting that the increase of in the frequency of these behaviors indicate improvement of thermal welfare.